Synthesis and photovoltaic properties of conjugated side chains polymers with different electron‐withdrawing and donating end groups

A series of novel low band gap polymers containing conjugated side chains with 4,7‐dithien‐5‐yl‐2,1,3‐benzodiathiazole and different electron‐withdrawing end groups of aldehyde ( PT‐DTBTCHO ), 2‐ethylhexyl cyanoacetate ( PT‐DTBTCN ), 1,3‐diethyl‐2‐thiobarbituric acid ( PT‐DTBTDT ), and electron‐donating end group of 2‐methylthiophene ( PT‐DTBTMT ) have been designed and synthesized. All polymers exhibit good solubility in common organic solvents, film‐forming ability, and thermal stability. These conjugated polymers show the broad ultraviolet‐visible absorption and the narrow optical band gaps in the range of 1.65–1.90 eV. Through changing the end group of conjugated side chains, the photophysical properties and energy levels of the polymers were tuned effectively. Bulk heterojunction solar cells based on the blend of these polymers and (6,6)‐phenyl‐C₆₁‐butyric acid methyl ester (PC₆₁BM) reached the best power conversion efficiency (PCE) of 2.72%. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Photooptical Properties of Polymethacrylates Having Cyanoazobenzene‐Containing Side Groups with Lateral Methyl Substituents and Different Spacer Length

New photochromic polymethacrylates with different spacer length having azobenzene side groups and lateral methyl substituents were synthesized. The phase behavior of polymethacrylates and their photooptical properties were studied and compared with unsubstituted analogues. It is shown that an introduction of lateral methyl substituents results in almost complete suppression of liquid crystalline (LC) phase formation and strong decrease of photoinduced dichroism values. It is found that rates of the photoinduced E‐Z isomerization and back thermal Z‐E isomerization are almost independent on spacer lengths. Due to the presence of lateral substituents, the photoinduced azobenzene Z‐form shows remarkable long lifetime, and back thermal conversion at room temperature takes more than 10 days. Specific peculiarities of the photoorientation process in polymer films under the polarized UV and visible light action were studied and their mechanism is suggested. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1337–1342     

Criss‐cross amphiphilic polymers and analogous model systems

A new class of amphiphilic polymers carrying two pendant docosyl (C22) chains, located at periodic intervals that are separated by PEG chains of varying lengths, was synthesized via a simple melt‐transesterification polymerization, using dimethyl, 2,5‐didocosyloxyterephthalate as one of the monomers. DSC, variable temperature FT‐IR, and WAXS studies demonstrated that immiscibility between the pendant docosyl units and the backbone PEG segments drives their self‐segregation; this results in the crystallization of the pendant docosyl segments and the generation of a lamellar morphology with the alkyl segments and the PEG chains occupying alternate layers. Based on the study of model criss‐cross amphiphiles that resemble the polymer repeat unit, it is postulated that the chains reconfigure such that both the docosyl chains fold to one side of the terephthalate unit while the PEG segments form a loop on the other side; these chains then organize in a bilayer to form the lamellar structure. The simplicity of the synthesis and the rather unique properties of these polymers suggests that such a design could be translated to develop other interesting functional materials that could exploit the immiscibility‐driven microphase separation for the generation of sub‐10 nm domains; these could have potential applications, such as in membranes, solid polymer electrolyte formulations, and so forth. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1554–1563     

与 Cauchy 微分中值定理相关的几个问题

根据Cauchy微分中值定理表达式的结构引入辅助函数 F（x ，c）＝ f （x）- f （c）g（x）- g（c）（a＜ c＜ b），通过讨论其可导性，得到相关的几个不等式，由此得出Cauchy微分中值定理存在唯一“中值点”的一个条件，并给出其逆定理的一个较弱表述。     

Successive stepwise evolution of host layer‐stacking framework upon the intercalation of mobile vapor guests within side‐chain layers

For the ordered phases of hairy‐rod semiconductive poly(2,5‐bis(3‐tetradecylthiophene‐2‐yl)thieno[3,2‐b]thiophene) (PBTTT) sandwiched in between crystalline platelets of hexamethylbenzene, the successive stepwise evolution of layer‐stacking framework upon guest intercalation has been studied in this research. The direct consequence of the guest intercalation into side‐chain layers is evaluated to cause the lateral shift of thiophene backbones along π–π stacking, resulting in stepwise shift of ultraviolet absorption wavelength. The thermal motions of vapor guests within disordering side‐chain layers subsequently cause progressive expansion of host stacking framework. With the increase in side‐chain length, thicker layers of disordering side chains in liquid crystals (LCs) accommodate additional vapor guests and larger amplitudes of thermal motions of guests, hence promoting the level of reversible d‐spacing change. The mixing between mobile vapor guests and aliphatic side chains is clarified as the mechanism of guest intercalation, which rationalizes successive guest intercalation during heating and the contribution of disordering side‐chain layers. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1448–1456     

The side chain effects on TPD-based copolymers: the linear chain leads to a higher jsc

Abstract

Alkyl substituents appended to polymers play the determining role on self-assembly and film-forming properties, and on device performance. In this work, we highlight the effects of the linear and branched flexible chains appended to the acceptor moiety (A) in D-A type copolymers. Two thieno[3,4-c]-pyrrole-4,6-dione (TPD) based copolymers PT1 and PT2 with different alkyl chains, were designed and synthesized. By comparison their UV-vis absorptions, HOMO/LUMO energy levels, as well as the characters in polymer solar cells, the influences of alkyl chains were investigated. Both copolymers showed molecular weights of 21?kDa and similar optical properties with a medium band gap of 1.93?eV, while PT2 with the branched chain exhibited a lower HOMO than that of PT1 (?5.43 vs???5.37?eV). In bulk heterojunction (BHJ) solar cells, PT1 with a linear chain presented a short circuit current (J_sc) of 6.76?mA cm^?2, open circuit voltage (V_oc) of 0.89?V and power conversion efficiency (PCE) of 2.92%. To the contrary, PT2 showed a J_sc of 3.53?mA cm^?2, V_oc of 0.99?V, delivering a relatively lower PCE of 2.05%. The result indicates that appending a linear alkyl chain to the TPD unit could sufficient enhance the J_sc value of the related polymer.     

Polyurethane Ionomers from Cycloaliphatic Diisocyanate and Polytetramethylene Glycol

Abstract

Segmented polyurethane (PU) ionomers were prepared from cycloaliphatic diisocyanate [methylene bis(4-cyclohexyl isocyanate) (H₁₂MDI) and isophoron diisocyanate (IPDI)] and polytetramethylene glycol (PTMG) by using an anionic-type chain extender, viz., dimethylol propionic acid (DMPA). The effect of ionic content and butanediol (BD) on the state of dispersion and physical properties of emulsion-cast film was determined using Autosizer, transmission electron microscopy (TEM), Instron, and Rheovibron. With increased incorporations of DMPA in PU, particle size of emulsion decreased asymptotically, tensile modulus and strength increased, and the glass transition temperature (T _g) moved toward the higher temperature. On the other hand, with increased incorporation of BD in PU, particle size of emulsion, tensile modulus, and strength of the emulsion cast film increased, and the major transition of soft segment moved toward higher temperature. With regard to the structural effect of the isocyanate, H₁₂MDI gave finer dispersion and better mechanical properties over IPDI.     

Side chain liquid crystalline composites,occurrence of interdigitated bilayer smectic C phases

We report on the results of X-ray investigations in two series of polymer monomer composites, PM6Rm-33 and PMnR12-33, which consist of mixtures of achiral liquid crystalline side chain polymers and their monomers. These mixtures present a unique integration of monomer in the polymeric base which assists in modifying their properties and forming homogenous composites. X-ray measurements for all the investigated composites indicate the existence of bilayered smectic C phases (SmC₂). In several composites, the interlayer distance of the SmC₂ phase abnormally increases with cooling; this is associated with the aliphatic interdigitation at the tail-to-tail interface being more prominent when longer aliphatic tails are present.     

Synthesis and characterization of side chain cholesteric liquid crystalline elastomers derived from chiral bisolefinic crosslinking units

In this work we prepared a nematic monomer (4′‐allyloxybiphenyl 4′‐ethoxybenzoate, M₁ ), a chiral crosslinking agent (isosorbide 4‐allyloxybenzoyl bisate, M₂ ) and a series of new side chain cholesteric liquid crystalline elastomers derived from M₁ and M₂ . The chemical structures of the monomers and polymers were confirmed by FTIR and ¹H NMR spectroscopy. The mesomorphic properties were investigated by differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy and X‐ray diffraction. The effect of the content of the crosslinking unit on phase behaviour of the elastomers is discussed. Polymer P₁ showed a nematic phase, P₂ –P₇ showed a cholesteric phase; P₆ formed a blue Grandjean texture over a broad temperature range 145–209.6°C, with no changed on the cooling. Polymers P₄ –P₇ , with more than 6?mol?% of chiral crosslinking agent, gave rise to selective reflection. Elastomers containing less than 15?mol?% of the crosslinking units displayed elasticity, reversible phase transition with wide mesophase temperature ranges, and high thermal stability. Experimental results demonstrated that, with increasing content of crosslinking agent, the glass transition temperatures first fell and then increased; the isotropization temperatures and mesophase temperature ranges decreased.     

A study of the transition of liquid-crystal alignment from homeotropic to planar on a polyimide layer

The alignment of nematic liquid crystals by rubbed polyimide surfaces has been well-studied and developed. A novel polyimide film which induced a homeotropic alignment of the nematic liquid crystal without rubbing or with weak rubbing strength was presented. However, there was a transition from homeotropic to planar alignment of the nematic liquid crystal after strong rubbing. In order to study the transition, the polyimide surface was investigated by atomic force microscopy, surface free energy measurement and angle-resolved analysis X-ray photo-electron spectroscopy before and after rubbing with a velvet fabric. It was found that both the change of surface polarity and surface morphology were not the reasons for the transition. The droop of the side chain on the polyimide surface after the rubbing treatment was detected by angle-resolved analysis X-ray photo-electron spectroscopy. Owing to the special structure of the novel polyimide, the X-ray photo-electron spectroscopy was successfully used for the first time to analyse the conformational change of the side chain of a polymer. In conclusion, the transition of nematic liquid crystal alignment from homeotropic to planar after rubbing was influenced by the side chain conformation of the polyimide.